|
Post by Keith De Paul - KDP on Aug 12, 2013 15:02:16 GMT -5
Excellent!
|
|
|
Post by nydents on Sept 4, 2013 22:21:57 GMT -5
I picked up a free door from a body shop that had a lot of damage on the bottom from a collision but some good practice area at the top of the door. Some of the wave energy from the collision transferred to the top area that crated two crowns and two lows that I thought I would attempt. Attachments:
|
|
|
Post by nydents on Sept 4, 2013 22:27:49 GMT -5
After knocking down the highs an pushing the lows. With out training from KDP I would have gone about this dent the wrong way. Thanks Keith ! Attachments:
|
|
|
Post by Keith De Paul - KDP on Sept 5, 2013 7:50:53 GMT -5
Awesome work!! Great Job! P.S. try to upload smaller files so the pics fit in the post
|
|
|
Post by nydents on Mar 2, 2014 14:32:45 GMT -5
Wanted to try out the new light from Ultra and put a shallow crease I'm my practice hood. The left side of the crease is over a brace. The most challenging part of this was where the brace ended and the open area started. The ball tip rod could only get so close and my brace tool didn't have enough leverage at the very edge of the brace. Attachments:
|
|
|
Post by dentdaddy on Mar 3, 2014 14:09:48 GMT -5
Wanted to try out the new light from Ultra and put a shallow crease I'm my practice hood. The left side of the crease is over a brace. The most challenging part of this was where the brace ended and the open area started. The ball tip rod could only get so close and my brace tool didn't have enough leverage at the very edge of the brace. You can jam a stiff putty knife into the brace and pry off of it with a whale tail in that area to extend the edge of the brace. Nice looking light looks similar to my pro pdr solutions reflection.
|
|
|
Post by nydents on Mar 3, 2014 23:29:19 GMT -5
Wanted to try out the new light from Ultra and put a shallow crease I'm my practice hood. The left side of the crease is over a brace. The most challenging part of this was where the brace ended and the open area started. The ball tip rod could only get so close and my brace tool didn't have enough leverage at the very edge of the brace. You can jam a stiff putty knife into the brace and pry off of it with a whale tail in that area to extend the edge of the brace. Nice looking light looks similar to my pro pdr solutions reflection. Good thinking with the putty knife !!! Yes the pro pdr and ultra light are very similar. Either one I picked would have been a 200% improvement to what I had previously.
|
|
|
Post by hockeynut on Mar 4, 2014 3:26:00 GMT -5
Or try this I was working on a 2013 Ford full size van hood hit with 100+ hail dents Saturday needed a little more pushing power... Attachments:
|
|
|
Post by Keith De Paul - KDP on Mar 4, 2014 7:52:47 GMT -5
YOU GUYS ARE AWESOME!.... You know how long it would take you to find that many "right" answers so fast and in one place? ... MAN! You guys ROCK! REALY!
|
|
|
Post by hockeynut on Mar 4, 2014 12:27:05 GMT -5
Thanks Boss
|
|
|
Post by nydents on Mar 4, 2014 22:09:47 GMT -5
Now that's thinking outside the brace. Hahaha
|
|
|
Post by hockeynut on Mar 4, 2014 22:59:31 GMT -5
Brother ya'll got to do what ya need to do to git-r-done!!
|
|
|
Post by streetrod2006 on Mar 21, 2014 8:12:20 GMT -5
|
|
|
Post by nydents on Mar 21, 2014 11:55:34 GMT -5
Nice job!
|
|
|
Post by Keith De Paul - KDP on Mar 21, 2014 12:39:26 GMT -5
|
|